Bench Top Router Table - Page 3

Pages 1|2|3|4|5

Bench Top Router Table

Assembling the frame

Mounting frame pieces under table top. I used dowels to provide some more strength and stability. All dowels were around 2" long.
 
     
img_1017 Drilling holes for dowels in bottom of feet, into bottom of side frames.
 
img_1018 Clamped to dry.
 
img_1030 After the glue dried and the dowels are planed flat.
 
img_1031 Bottom of feet.
 
img_1032 Gluing the back brace in place. I needed lots of clamps for this glue up.
 
img_1033 img_1034
 
img_1042 Frame all finished. Now to mount top to frame.
 

Pages 1|2|3|4|5